WL 202 system is used for lining walls when the cavity space or substrate is more than 70mm.
The system consists of metal frame (STK 50,70,90 and 100) that made of galvanized steel.
The assembling of the system is the same as WP 101, horizontal profile (TK) track, and vertical profile (ST) stud that is inserted in the track then the gypsum boards are attached on the visible side, after the space have been filled with the proper insulation.
(The System comply with ASTM C645).
Golden Metal Stud Partitioning is an economical, friction-fit system for assembling internal partitions. The unique design of the components ensures high strength, easy installation and a higher performing
Alternative to traditional timber frame partitions.
Golden Metal STK Partitions are constructed using a frame of TK Track at the head and base with ST Studs for vertical framing elements. A range of ST Stud and TK Track widths allow varying partition depth, enhancing fire resistance, sound insulation and maximum heights.,
(The System Comply With ASTM C645)
WP102 Staggered Stud Partition Systems are non-load bearing partitions which have been designed to provide improved acoustic performance when compared with equivalent widths of single stud partitions.an average of 1~2dB improvement is
Gained by using the staggered stud design.WP102 Staggered Stud Partition Systems are constructed by installing TK-Tracks which are slightly wider than the ST-Studs, this allows ST-Studs to be staggered creating a frame separation within the partition. Once frame is erected, plasterboard is then faced into each staggered frame. Due to the staggered stud frame design creating a separation within the partition .WP102 Staggered Stud Partition Systems are suitable for areas with a height limit of 4m
The WP103 system is a dual layer ST Stud Partition used where the highest fire and acoustic performance is required. Or the height of partition is excess of10m
WP103 Twin Frame Partitions are constructed using two separate metal stud frames set a minimum of 20mm apart and braced together from two metal frames
In parallel with Track Brace and boarded on the external sides only. Varying cavity size options help optimize acoustic insulation and provide a service cavity. The WP103 Twin Frame system is a lightweight, flexible option compared to traditional masonry separating walls.
The highest performing WP103 Twin Frame partitions are commonly
Used in cinemas, theaters and schools
Walls which enclose lift shafts, stairwells and other vertical shafts are the most important walls
in a building from a life-safety standpoint. Should fire occur, firemen use the lifts to reach the fire the stairwells provide the only means for human egress within the building. Since these walls contain the life-lines of the building, they must be structurally strong to withstand lateral loads and provide needed fire protection.
Golden Metal have been designed a comprised system of CH-Stud and J Track components,
Resulting in easier installation.
Features include:
1-Easy Installation
Because the shaft wall assemblies are built from one side only, there’s no need to access the inside of the shaft. The strong-H members go up quickly. Most configurations require only two steel components and two types of gypsum board. That makes the systems ideal for furred chases and interior partitions where fire ratings are required for exterior walls and access is restricted. Engineered for durability, the systems withstand the air-pressure surges of high-speed elevators as well as the lateral impact of stairway doors. One-sided installation design
2- Fire rated
3- Full range of sizes: 70mm, 100mm, 125mm
self-propelled hydraulic drive scissor lift is widely used in the aerial work platform industry.
Self-propelled scissor lifts usually used in factory operations, high-altitude installations, aviation industry and high-altitude cleaning and maintenance work.
The biggest advantage of the self-propelled scissor lift compared to the manual mobile scissor lift is that people or workers can stand on the top platform to control the movement of the scissor lift, which is more convenient.
These heavy duty scissor lift elevator are ideal for cargo handling and lifting heavy industrial loads.
Built in hydraulic overload relief protects personal and structure.
Heavy-Plate platforms with structural reinforcements minimize deflection while the wide base provides increased rigidity and stability.
Golden Metal Company provides the service of constructing steel trusses under the management of a consulting office and implementation is carried out at the highest level of scientific technology according to the principles of the industry
Made of high quality paper-faced gypsum board with a layer of PVC on surface and aluminum foil on back.
(Gypsum, PVC and aluminum foil are 100% environmental friendly materials with character of water proof and fire proof).
